CSM is a Fibre mat that provides equal strength in all directions and is used in a variety of hand lay-up and open-mold applications. Produced by chopping continuous strand roving into short 1.5 to 3 inch lengths and dispersing the cut fibers randomly over a moving belt to form a sheet of Fibre mat.

Chopped Strands are made by bundling thousands of E-glass Fibre together and chopping them into specified length. They are coated by original surface treatment designed for each resin to increase the strength and physical properties.

Fibreglass mesh is an economical material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades and on internal walls and ceiling surfaces.

A Woven Roving is a type of fabric material consisting of glass fibers that are woven in a specific pattern for the purpose of providing high strength when used to reinforce a coating or other composite system.

Fibreglass Texturized Yarn are bulked and blown by special facility with high pressure air. The texturized and voluminized glass yarn can support great amount of air than single yarn. It can provide better insulation and excellent acoustic absorption.

Ceramic Fibre Yarn is twisted from ceramic Fibre strands, used as heat insulation material in thermal installations and heat conducting systems. It can also be extensively made into all kinds of ceramic fibre textiles which are excellent substitutes for asbestos.

Fibreglass Yarns consist of a defined number of E-Glass filaments of a certain nominal diameter brought together to form a yarn. The structure of the yarn is fixed and protected by a size and a slight twist, generally in Z-direction.

Fibreglass Fabrics continue to be the most commonly used reinforcement in the composites industry today. Generally, they are the least expensive among reinforcements and offer great ease in handling. When combined with resin, it delivers composite parts having excellent strength.

Direct Roving is made of E-type glass with maximum alkali content of <1.0 %. A thread usually consists of 1200 to 2400 endless fibres. Direct roving is suitable for use in various textile technologies, filament winding, pultrusion, multi-axial weaving, and others.

Fibreglass Battery Separator tissue is characterized by large area weight, low DC mass resistivity, high absorption capacity, good acid resistance, low content of deoxidized potassium permanganate (KMnO4) organic substance and impurity.